Hover projection · plug and play

A hover-projected trackpad for low-energy days

Scroll in bed, work reclined, game lying down. Hover within 1 cm and the pointer follows — Apple, Windows, Android and HarmonyOS, plug and play. No drivers, no setup.

Windows / macOS · Linux · Android · HarmonyOS · iOS · Bluetooth 5.4

ShadowTouch hover-projected trackpad, 45-degree product view
11 mm slim 104 × 74 mm Bluetooth 5.4 45° product view Multi-platform Absolute mapping 1 cm hover Driver-free
Hover controlAbsolute position tracking
Dual-touchNative Android gaming
Every platformiOS · Android · HarmonyOS · Win · Linux
Slim & light104 × 74 × 11 mm

Demo

See it in 60 seconds

No holding your phone up, no leaning over the desk. See three of the most common ways to use it.

The demo film is in production. The finished video will play here.

Features

Move however you like

No setup, no drivers. Hover, tap and scroll from whatever position feels good.

Hover to point, tap to click

The pad maps your finger's absolute position to the screen. Keep it within 1 cm and the pointer follows.

Native dual-touch for Android

Native touch with a visible finger indicator. It uses the phone's own touch controls, so you never have to worry about controller compatibility.

Switch devices in one press

Move between phone, tablet and computer with Volume− + Volume+. No re-pairing.

Custom keys

Remap the buttons to your workflow. Set the wake key to the voice-input shortcut of your preferred LLM tools (Doubao, ChatGPT, Tongyi…) and talk to the model with one press.

Made for long reads

TikTok, Bilibili, Fanqie Novel and manga apps. Turn pages, like and comment with one finger.

Works with everything

Apple, Android, HarmonyOS, Windows, macOS and Linux — phones, tablets and computers of every size.

Note: on Windows, Android and HarmonyOS the companion app adds multi-touch, so several fingers can work at once.

The app also switches between portrait and landscape — tap “Switch to landscape” and play landscape games without changing how you hold the pad.

Setup & switching

Connect once, switch with one press

Pair each device first. To switch, press Volume+ + Volume−, then follow the setup guide below to pair the second device.

System setup guide Choose Windows / macOS / Linux, Android / HarmonyOS or iPhone / iPad and follow the connection steps.
About 2 minutes

Works on Windows 10 / 11, macOS and Linux. Pairing works the same way in system Bluetooth; no driver is needed.

  1. Power on

    Slide the power switch on the right side of the pad upward. The indicator lights up when it is on — charge it fully before first use.

    Power switch on the right side of the ShadowTouch, highlighted with a dashed box
    Fig. 1 · Power switch on the right side
  2. Open Quick Settings

    Click the network, volume or battery icon at the right end of the taskbar to open Windows Quick Settings.

    macOS: open Control Center at the top right, or go straight to System Settings › Bluetooth.

    Quick Settings entry at the right end of the Windows taskbar
    Fig. 2 · Quick Settings in the taskbar
  3. Turn on Bluetooth

    Click the Bluetooth tile so it lights up. When “Not connected” turns into the device name, the pad is paired.

    On macOS or Linux, turn Bluetooth on in Settings › Bluetooth and pick SHADOW_TOUCH from the list.

    Bluetooth tile in the Windows Quick Settings panel
    Fig. 3 · The Bluetooth tile
  4. Select SHADOW_TOUCH

    Pick SHADOW_TOUCH in the device list and pair. No password and no extra driver are required.

    On Windows 11 the path is Settings › Bluetooth & devices › Add device.

    SHADOW_TOUCH in the Windows Bluetooth device list
    Fig. 4 · SHADOW_TOUCH in the device list
  5. Verify

    When Bluetooth settings show SHADOW_TOUCH as “Connected” with a battery level, pairing worked. Back on the desktop, drag the pointer and tap to confirm it responds.

    If the pointer does not move, remove the old pairing in Bluetooth settings and search again.

    SHADOW_TOUCH shown as connected with a battery level in Windows Bluetooth settings
    Fig. 5 · Connected, with battery level

Can't connect? Remove the old SHADOW_TOUCH entry in Bluetooth settings and search again. Desktops need a Bluetooth 4.0 or newer adapter.

App guide

After pairing, make the keys yours

Open the ShadowTouch desktop app, confirm the connection, then remap the five keys to whatever you use.

  1. ShadowTouch.exe shortcut on the Windows desktop

    Open the desktop app

    After installing from the download section, double-click the ShadowTouch icon on the desktop, or open it from the Start menu.

  2. ShadowTouch console showing the Bluetooth status and the five key positions

    Check the connection

    The console shows “Bluetooth connected” and the battery level at the top. The five key positions sit in the middle: cancel and confirm on the left, volume and lock on the right.

  3. The app's key area: five remappable keys plus reset and landscape buttons

    Customize keys

    Click any key number to remap it. “Switch to landscape” is there for landscape phone or tablet games.

Switching guide

One pad, several paired devices

Press the key combo to put the pad into switching mode, then follow the system setup guide above to pair the second device.

Hold Volume− + Volume+

Hold both volume keys on the right side of the pad. It enters switching mode (the indicator blinks) and stops sending input to the current device.

Front, back and side of the pad, with the volume keys highlighted by a dashed box
Fig. 1 · The Volume − / + combo

Pair the second device

Open Bluetooth on the second device (an iPad, another computer or a phone) and walk through the guide above. When pairing finishes, the pointer moves to that device.

The pad next to an iPad, pairing a second device
Fig. 2 · Pair the second device

If the second device cannot find the pad, disconnect the first device, or press the combo again before searching.

Gallery

The real thing, in real places

Start with the hardware, then see how it fits into your day. The four views and the desk scene are real photos; the rest is still being shot.

The buttons and side keys are product renders, the in-the-box image is an illustration; the in-bed and gaming scenes are still being shot.

Shortcuts

One press away

The buttons and gestures you'll use most. Start with Confirm and Cancel.

Action Button / gesture
Confirm / Enter
Confirm
Back / Backspace
Cancel
Lock Android device
Lock
Volume down / up
Volume−/Volume+
Arrow keys
Two-finger swipeNon-Apple mode, app not connected
Switch device
Volume−+Volume+
Wake AI voice input
Custom shortcute.g. Doubao / ChatGPT voice input

Specs

Small body, capable core

At 104 × 74 × 11 mm, it disappears into your bag.

Hardware

Brand
SlothTech
Battery
1000 mAh
Battery life
Up to 5 hours
Charging time
About 1.5 hours
Dimensions
104 × 74 × 11 mm
Port
USB-C

Connection

Bluetooth
Bluetooth 5.4
Device name
SHADOW_TOUCH
Range
Up to 10 m
Systems
Apple / Win / Linux / Android / HarmonyOS
Devices
Phone / tablet / computer
Pairing
Bluetooth, driver-free

* Use the included USB-C cable and charge while the pad is powered off.

Download

Get ShadowTouch

Installers are hosted on Gitee. All versions and release notes live there.

On Linux there is nothing to install: pair SHADOW_TOUCH in the system Bluetooth settings and it works.

Current version v1.0.0 · Gitee releases & changelog

FAQ

Setup & troubleshooting

Most answers are in the setup guide. If not, scan the QR code to reach us.

I can't find the device or it won't connect.

Make sure the pad is powered on and the indicator is lit. Remove any old SHADOW_TOUCH pairing in Bluetooth settings and search again. See the Windows / macOS / Linux or Android setup guide; on Apple devices, confirm blue Apple mode before pairing.

Dragging fails on an Apple device?

Turn AssistiveTouch off and back on, or toggle “Perform Touch Gestures” off and on.

The pointer moves, but taps don't register.

On Apple devices, confirm blue Apple mode and that AssistiveTouch and “Perform Touch Gestures” are on. If dragging stops, turn AssistiveTouch off and on again. If you previously paired in Android mode, forget the device in Bluetooth, switch modes and pair again.

Android shows no pointer.

Enable “Show taps” in Developer options. On some phones the floating dot still does not appear even with this setting on — install the ShadowTouch app to get a working pointer.

Which systems are supported?

Windows 10 / 11, macOS, Linux, Android, HarmonyOS, iOS and iPadOS. Phones, tablets and computers are supported. The Bluetooth name is SHADOW_TOUCH and the range is about 10 metres.

What about battery life and charging?

1000 mAh battery, up to 5 hours of use and about 1.5 hours to charge. Use the included USB-C cable and charge while the pad is powered off.

How do I switch between devices?

Pair each device once. To switch, hold Volume− + Volume+ to enter switching mode, then follow the guide above to pair the second device; the pointer moves there when pairing finishes. See the switching guide.

Does the floating dot ever lag?

Sometimes the dot lags slightly behind your hand. Power-cycle the pad, or restart the phone or computer — that usually clears it up.

ShadowTouch demo video

The demo video is on its way

We're still editing the film. In the meantime, the setup guide gets you running in four steps.

Read the setup guide